IDC Para-View ©2014

 The IDC Para-View is a White Noise Audio/Video System "Ghost Box" I first created in late 2013 and is very experimental. It is meant to be used in the paranormal field. Unlike a television set, the standard Para-View is a closed loop system using a camera/mic and LCD video monitor with the IDC White Noise Generator introduced to the signal and as such should not allow outside interference usually, however results that cannot be explained have occurred while using this device. The white noise circuit will randomly generate from 0hz-2mhz, just below 3mhz. The Para-View runs on 12v(8x AA batteries) making it completely portable but also has a 12v wall power pack. the IDC Indicator uses a separate 12v battery. This unit can be used for experimenting with ITC as well as used standalone for video recording during investigations as a camera and monitor. There is also an option to come with a 4-channel DVR and Two(2) additional night vision cameras to record your sessions in detail. Using the Bluetooth optional module built into the system allows you to connect any App you have on a Bluetooth capable device to play through the system. The Bluetooth is audio only at this time, I am however working on a video module to see if it is a viable option. I also have a portable TV hack I am building and will release later that will not be a closed loop.

What it does not have:

NO video banks, NO audio banks, nothing pre-loaded or pre-programmed. Communications with this device, if any at all is possible, will be pure. Nothing manufactured and no false positives.

This system can also be configured to be either closed loop or receive UHF/VHF frequencies, this model is still in the works but I hope to be able to offer it as another option.



Included:

  •  Camera/Mic Combo 1/3CMOS, 1/4 Image Sensors Effective Pixel: PAL: 628 x 582, NTSC: 510 x 492 
    Image Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm 
    Minimum Illumination: 3 LUX 
    Horizontal Definition: 380 Lines  Transmission Signal: Audio, Video 
    Sensitivity: +18 DB  AGC ON / OFF 
    Voltage: 6V DC  12V DC 
    Current: 200mA 
    Power Consumpstion: 200 mW
  • IDC White Noise
  • Bluetooth 4.0
  •  removable LCD temperature readout/w temp probe in °F  or °C
  •  AV in/out jacks (3.5mm and rca jack)
  •  adjustable camera mono pod
  •  non-ferrous camera support plate
  • RCA Digital recorder with usb capable of recording up to 38 hours
  • 6ft 3.5mm audio cable
  • 6ft Video rca cable
  • For a limited time I am also including: A Coby Cx - R122 Handheld Micro Cassette Voice Recorder with one tape to get you started. Tape is still a very popular method of recording EVPs.

Optional Components(built into enclosure):

  • IDC Accelerator 
  • IDC MF Generator
  • Linear or Random scan tuner
  • Camera with night vision     Description :
     Dimension: 3.5 X 2.5 X 1.2cm 
    Video Camera Parts: 1/3CMOS, 1/4 Image Sensors 
    System: PAL/CCIR NTSC/EIA  
    Scanning Frequency: PAL/CCIR: 50Hz, NTSC/EIA: 60Hz 
    Effective Pixel: PAL: 628 x 582, NTSC: 510 x 492 
    Image Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm 
    Minimum Illumination: 0.2 LUX 
    Horizontal Definition: 380 Lines 
    Transmission Signal: Audio, Video 
    Sensitivity: +18 DB  AGC ON / OFF 
    Voltage: 6V DC  12V DC 
    Current: 200mA 
    Power Consumpstion: 200 mW

Two are sold already. Serious inquiry please. jaywprather@idcdevices.com



 


 

 

Another Album here on Facebook
 

 

4Ch DVR Para-View